Heat shrink tube Brother HSE-651E for Brother PT (P-Touch) label printers.
Size: width 21 mm / length 1.5 m
Colors: black print on yellow tube
Recommended cable diameter: Ø min. 4.2 mm / max. 13.5 mm
Shrinkage ratio: 3:1
Tube shrinkage temperature: 110°C to 140°C
Temperature resistance: -55°C to 135°C
Flammability class: VW-1
HSe heat shrink tubes are non-adhesive identifiers made of polyolefin to protect cables. The product is fireproof, waterproof and resistant to UV radiation. They allow for permanent and legible marking of cables in a wide range of diameters. The heat shrink tubes available in our assortment are Brother distinguished by the fact that they adhere very tightly to the surface, thus better protecting them. When heated, it does not get dirty or fading, the print remains clear even after abrasion and contact with cleaning products and industrial liquids.
the original HSE-651E heat shrink tube from Brother with a width of 21mm is designed to permanently mark cables and wires. The HSE-651E has a shrinkage ratio of 3:1 and is recommended for cables with a diameter of 4.2mm to 13.5mm. The shrink tube with black print on a yellow background is compatible with P-touch printers that have the HS and HSe logos on the cassette cover.
the original HSE-651 heat shrink tube from Brother is an integral part of the electrician's kit and helps you meet safety requirements and perform your work more efficiently.
Installation of heat shrink sleeve:
After placing the printed tube on the cable, you need to heat the carrier with a heat gun. The heat shrink sleeve shrinks, tightly clamping the cable. Glue is not needed, so that even in a warm environment the tube will not break off the cable.
Heat shrink sleeves Brother HSe are recommended for the determination of:
- electrical wires
Brother heat shrink tubes are UL certified as a component of UL 224
Compatible with P-Touch Brother printer models:
PT-H500 PT-E550WVP PT-E550WVP PT-P750TDI PT-D800W PTP900W PTP950NW